Immediately place your finger onto the Touch ‘N Open fingerprint sensor. The safe digital display will read “hold”, then “finger-0”. The safe will emit a series of “beeps” and the PIN is accepted. The PIN must be two to eight digits, and then push the # key. Immediately enter your PIN Code into the keypad. When pushed, the safe will beep and the digital display will read “CODE.” Important: the PIN must be entered within 10 seconds after pushing the memory button. Use a screwdriver or similar type tool and push the recessed memory button on the interior side of the safe door. The key should stop turning at this point. Use the six-cut key to open the safe door by inserting the key and turning one-quarter turn counterclockwise. The safe is ready to be programmed for keypad and fingerprint access. Open the battery compartment on the face of the safe door by removing the cover. The third key, the Override Key, has six cuts, and is designed to unlock and operate the boltwork to open the safe door should there be an electronic and/or PIN code problem. The FingerPrint Safe comes with three keys: two five-cut keys that operate the boltwork when either the correct PIN code has been entered or when a pre-programmed fingerprint is scanned and authorized. Once programmed, this fire safe can be opened three different ways: using the digital keypad, the override key, or the fingerprint reader biometric sensor.įor all safe opening operations, a key must be used to retract the boltwork. Once the fingerprint(s) have been enrolled, the safe requires only one to two seconds to determine if a fingerprint is correct. Important: The first registered fingerprint is the default master fingerprint and is required for registering additional fingerprints. The safe’s on-board database can be programmed with a maximum of 10 fingerprints. The battery powered keypad accepts a two- to eight-digit personal PIN code. The Touch ‘N Open FingerPrint Safe is equipped with a keypad, biometric fingerprint reader, and a key lock. This C/UL classified safe has a 1700-degree, one-hour heating endurance test, drop test, and re-heating test under the fireproof safe inspection provisions of the Japan Testing Center for construction material, No. The Brinks Touch ‘N Open™ Safe, model number 5084DB, is a 1.2-cubic foot interior fire safe that can be opened by placing a finger on the biometric sensor.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |